Last Updated on
There is no doubt that you are here concerning the whole fan installation. Probably you are getting ready for summer days or installing your new acquire house. Either way, we are here to enlighten and guide you how to install a quietcool whole house fan.Did you know that you can install the whole house fan yourself? What you need is a little assistance and effort. This product is designed to suck the hot air in your house and move it to the attic while bringing the cool and fresh air from outside. Typically, whole-house fans are.
- Air condition alternative
- Wall mounted
- Ceiling mounted
This product will offer you the desired results during the high temperatures in your premises compared to the outside temperature. Nevertheless, below are some of the steps to guide you for a successful installation.
Choose The Whole House Fan
Depending on the size of your house, the whole house fan is available in various sizes. Therefore, choose the one that has the capability of operating within your attic. Also, you have to consider spacing within the attic joists. Many houses have attic joists with a center to center spacing of up to 16″ or 24″. Some products can easily be accommodated within the spacing of either attic joists. On the other hand, there are those products that are limited to a specific spacing. Typically, you should consider these parameters carefully before you remove your wallet. Also, before you start the installation process, make sure you read and understand the installation manual thoroughly.
Identify The Installation Location
The whole house fans tend to perform well when installed at the center of a building. If you are having an unobstructed hallway, then that might be your best installation location. To identify the best location, just move to the attic and select the joists next to the center. Also, ensure that the fan shutters are having enough space to open and close. The location should also be far away from pipes and wires.
Also Read: Whole House Fan ELectricity Use
Construct The Supporting Frame
At this step, it is mandatory to construct a supporting frame or a wooden box to support your fan. It will also help in raising over your ceiling joists. Additionally, the installation manual comes with the correct measurements of the frame depending on the dimensions of the fan. Consider using caulk for sealing all the open spaces in your frame. Move your constructed frame to the attic, then place it in your selected location. Hammer in a nail from all the corners of the frame through the drywall.
Installing The Fan
Most fans are available with a gasket, which is placed in the frame. After to have installed the gaskets, push the fan to the attic. You should be able to secure it to the constructed frame or wooden box, using the mounting brackets. Make sure you seal the seams and openings with spray foam or caulk. This is to ensure that the fan sucks all the air from the rooms within your house. There is no compromise on the airtight seal or your circulation might not function appropriately.
Connect All Wiring
After switching off the circuit breakers, make sure you remove the covering on the control box. Connect all the colored wires to their right location as instructed in the manual. All the wires should be connected to the switch box. Cover the entire control box. Go back to your circuit breaker and switch on. Confirm if your fan is working. Take the grill and install it to cover the openings in the ceiling. Hand-drill the screws to the wooden frame you constructed. Finally, you can enjoy the whole house fan in your house.
It is very important to seek professionals in case of difficulties. Also, make sure to switch off the circuit breakers while installing. On the other hand, you can consult other users. Purchasing a product that is within your budget might be a great idea. You do not have to break the bank to buy this product. Always have someone standby to assist you whenever you need help. The whole house fan is a perfect addition to any modern home. It is worth your money.